Both models allow the automatic selection of the gas to be detected, of any available gases, by using a jumper.

STANDGAS HC is available for the detection of Butane-Propane, Methane –Natural Gas and Hydrogen.

STANDGAS HC PRO is available for: Methane - Natural gas - Butane - Propane - Hydrogen - Heptane - Hexane - Pentane - Methanol - Styrene - Ethane - Ethanol- Ethylene - Propylene - Acetone - Ammonia - Cyclohexane - Cyclopentane - Dioxane - Butyl Acetate - Ethyl Acetate - Acetic Acid - Isobutyl Alcohol - Isopropilic Alcohol (IPA) - Decane - Benzene - Octane - Methyl Ethyl Ketone (Butanone) - Nonane - Propanol - Toluene - Xylene - Kerosene and Methyl Isobutyl Ketone (MIBK) . For other gases, please consult

Stand-alone functioning: no panel required

1 programmable relay output module in between 2 levels
(20% LEL / 50% LEL), instant/retarded disconnection, retard disconnection programming and initial relay idle state.

Detection range from 0 to 100% L.E.L

Power range 10V to 30V DC

Optical indication for status and sensor fault.